So I took the boat out today to wakeboard for the first time with the new system installed. It was siphon draining all the bags so I had to turn the ball valve to stop it from draining through the fill hoses. When I did the system I put the fill oases in the top of the bags and I figured it wouldn't siphon out but I was wrong. Three 1" check valves are on order from wakemakers so it doesn't happen anymore.
Awesome job Brichter! I will be installing my cup holders soon. I have had the side panels off before during speaker install, but don't remember seeing how the tray is attached to the upholstered piece? Any advice is appreciated! I plan on adding 2 cup holders per side. Ray
Putting in the new amp. Gonna be 500 rms to the 485. The pro 80s came in a little bit rough so i removed the drivers and grilles and im gonna take the cans to a body shop tomorrow for paint. Stay tuned
Started running wiring for tower speakers. The left side is for the left pro 80 and the 485. The right side (starboard) is for the right pro 80. I decided to run another power wire up the starboard side just in case i wanna add lights to the tower later on. That will keep me from having to repeat this entire process in the future.
Ok got some updates. I ended up painting my pro 80s myself and with the help of MLA i got the right mounting clamps. I put the speaker setup on the tower today and got to hooking up the quick connects.
But i have a problem. The polk 2000.2 amp i got for the 485 is cycleing between protection and power mode and i cannot figure out the problem. Also the female end on one of the pro 80s quick connects has a faulty connection so i might just buy a new one.