PDA

View Full Version : Bye bye 206


Spud
05-04-2007, 11:08 PM
Soon to say goodbye to her.....
SkiBlue
05-04-2007, 11:10 PM
Upgrading to a bigger boat?
Spud
05-04-2007, 11:12 PM
Sticking to the 206 colour change and a few more options!
Spud
05-04-2007, 11:24 PM
more
MHayes
05-04-2007, 11:41 PM
Love the colors...hot boat!
NAWTEAK
05-05-2007, 12:00 AM
nice boat

that looks like the murray, where do u ski?
NAWTEAK
05-05-2007, 12:07 AM
i remember, echuca!

are u importing the new boat urself or going tho a dealer?
Spud
05-05-2007, 02:46 AM
NAWTEAK we ski out the back of the house; I live on the river :grin: The new 206 is coming direct through the Aussie Distributor
Andrew
05-05-2007, 02:57 AM
lol, those rims looked photoshopped! how do they ride?
Spud
05-05-2007, 03:12 AM
There only 18's ride fine only a very short trip to the ramp!!
NAWTEAK
05-05-2007, 04:55 AM
I live on the river

cant get any better than that!, i'l look out for ur new boat next summer

also sweet u can go direct via haines, we deal with them for warranty work and they are really good
Nates78Ski
05-05-2007, 12:37 PM
oh wow! that boat is gorgeous!!!

Nate
Spud
05-07-2007, 11:14 PM
I should add that my new 206 will be coming through Go Boating in Geelong not the Aussie Distributor as was mistakenly posted previously.
h20skier
05-23-2007, 04:11 PM
What year was the pictured boat? I just ordered a 2007 206 (upgrade from a 2000 Sport) and had some substantial tower issues. In 6-8" chop or crossing wakes the tower would shake violently. The vibration would then transfer into the gunwale. CC has the boat back in FLA and they are evaluating the issue. How is/was your tower on this boat?
Quinner
05-23-2007, 10:13 PM
H2O,

Wow, that is crazy about your tower. We have an 05' 206 w/factory tower and have never experienced anything even close too shaking as you described, would be interested in what CC determines was the cause of that issue.
h20skier
05-24-2007, 10:43 AM
It has been a little disappointing to say the least, but they seem to be committed to finding a resolution which is all I can ask for. Mistakes can and will happen and all you can do is ask that the manufacturer will step up and make things right. So far I think were on the right track, but I haven’t heard the cause of the problem as of yet. Thanks for your feed back.