PDA

View Full Version : Questions about 1985 2001



LOOSEMOPAR
10-03-2011, 07:49 PM
Just purchased my first sn 2001 for $3800 :)
seems to be in good shape runs well trailer in good shape. Gel is in nice shape needs a good buffing.
Now the question. When i drop it in the water i am getting water in the bilge area. I took the floor and rear seat out cant seem to find where it is seeping in.
I have all winter to discuss this as i just dropped it for storage. Any and all help would be great.,.

Oh and by the way this is a great site

LOOSEMOPAR
10-03-2011, 08:10 PM
14968

NautiqueJeff
10-03-2011, 08:14 PM
I'd check the shaft packing first, then the rudder packing. It is likely that one or both need to be adjusted or replaced.

http://www.nautiqueparts.com/packinggoretexgfofiber-316-perfoot.aspx

LOOSEMOPAR
10-03-2011, 08:18 PM
Thanks Jeff i had it in the water diidnt see anything at the shaft could not see the rudder to well

Lou

LOOSEMOPAR
10-03-2011, 08:43 PM
found my pics if i can upload them149691497014971149721497314974

NautiqueJeff
10-03-2011, 09:26 PM
That's a good looking boat! One of these days I would like to pick up a 2001 and fix it up.

wawasee
10-04-2011, 08:00 PM
Thanks Jeff i had it in the water diidnt see anything at the shaft could not see the rudder to well

Lou

My cousin had the same issue with his 83 2001. He did just as Jeff suggested and it took care of the problem. Great boat!

LOOSEMOPAR
10-04-2011, 08:53 PM
Thanks for the input I will repack both in the spring and see where it takes me....

next question how can you tell if it has been converted to electronic ignition?
I was told that it was but it looks like old points and condensor to me??