View Full Version : flight control towers
mike-d
12-07-2004, 10:00 PM
I have two correct craft flight control towers for sale. One is a 2003 brushed aluminum style tower, narrow rear tower pads. brand new, never been installed.
$1800.00 plus shipping
the other is a used 2004 style flight control tower, powered coated black, with predrilled holes for tower speakers etc. $1700.00 plus shipping
both towers come with mounting pads, and brackets.
Must sell, or will buy another boat for them to go on!!!!
Mike
bbmkks@aol.com
206skiboat
12-23-2004, 09:46 AM
I have a 2003 206 ski nautique. Are these towers made for my boat? Do you have any pictures?
mike-d
12-24-2004, 11:14 AM
what is your boat width? these are stock super air or super sport towers, bolt on. I dont know if they will bolt on to a 206? get me your hull dimensions etc.
Mike
here is a pic with the 04 tower on a 2001.
206skiboat
12-25-2004, 03:17 PM
My boats is in storage. I can get better dimensions after New Years. My manual has a Beam of 91.5" and length without platform of 20' 7.5". Do you have a picture of the 03 tower.
Thanks,
Jeff
skinautique
12-25-2004, 03:44 PM
Mike,
Please don't tell me that you disassembled that much of your boat to install a tower. Way too much work.
Ski206, that tower will not fit your boat. The dimensions are too far off.
mike-d
12-26-2004, 12:51 PM
I dropped a 3/4 inch socket in the boat, kept on rattling in the boat, so I dissasembled it, one section at a time. :wink:
the tower was set on top of the boat for picture purposes. It could fit on any size boat, as long as you have a good welder!
Mike
skinautique
12-26-2004, 05:16 PM
That makes more sense Mike!
skier8100
01-04-2005, 04:16 PM
Would the black tower fit a 97 SN?
skinautique
01-04-2005, 04:51 PM
Probably not without some SERIOUS bending and flexing. The ski deck is a bit narrower.
mike-d
01-26-2005, 04:03 PM
updated pic on 2003 fct
1time17
01-29-2005, 02:41 PM
still have the one for a 2001 oldey how much
mike-d
01-29-2005, 06:12 PM
the black tower on the 2001 is a 2004 used takeoff tower. I dont know if it will fit, you will have to cut it in the middle to make it fit. I hope you know a good welder, but you would have one rare looking 2001!!
Mike
icewake
04-21-2005, 09:52 AM
I have a 1999 Ski Nautique with open bow, I was told the cup holders might be in the way. But also would one of those tower fit on the boat?
Labatt911
12-19-2005, 12:41 PM
I know you have gotten a lot of questions reguarding fit on particualr boats. If you don't mind one more I am looking into the purchase of a 2000 Super Sport, will the black 04 style tower fit on that boat. Quess I should have started out with the question is the tower still available? If yes to both, where are you located and how much to ship to NE Ohio
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.