1992 Ski Nautique Parts For SALE/ Lots of Stuff

[Pgaski]

Boats and Parts for SALE


For sale:

2 1991 Correct Craft Trailers ( Both Single Axle )

Complete Engine and Transmission Assbly Pro boss GT-40 428Hrs/1.23:1 Tranny

Boat Hulls 1992-1996 Free


All Parts Are 1992ski

Complete Dash Assebly with white face Gauges

Interior 1992 (No Back Seat)

Prop

Shaft

Rudder Assbly

Hour Meter (White Face)

Temp Gauge(White Faced)

Windshield

Teak Deck with Brackets

Tracking Fins

Stern Lift Covers

Speedo Tubes and Hoses

Gas Tank

Filler Neck for Gas Tank

Exhaust Inverta Flow Muffler with all hoses

Thru Hull Shaft ***.

2 Center floor board Behind engine cover One Fiberglass ONe Pressure Treated 3/4Ply.

2 Engine Cradles

Bow Light And Stern Light Asseblies

Stern Grab Rail

Stern Step plate 1992 and 1996

All Carpet Trim and Interior Trim.

Spin on Fuel Filter Assembly

Gray Center Trim for Rub Rail

Floor Covers for battery box and ice chest

Wiring harness 1992

Steering/Throttle/Transmission Control Cables

Ski Pylon

Sterning Helm 1992 and 1996

All Lift rings Both Boats

I will have pricing and photos of everything over the next couple of days.


Email Me with Questions at:

Pgaski@hotmail.com

[93nautique0710]

paul has some great parts dont let them dissappear before there all gone the interior looks brand new engine in great shape trailer looks good jump on them

[Hollywood]

That is not a GT-40

[Pgaski]

This is a GT-40 with a Carb instead of Fuel Injection. CC was having alot of problems with the FI systems in 1994. I purchased this eng/tranny directly from PCM south of Columbus, OH.

[Hollywood]

What is pictured is not a GT-40.

Do you have a black fiberglass seat base available?

[93nautique0710]

its got the gt 40 heads says gt right on them so wouldnt that make it a gt 40 i always thought so

[93nautique0710]

its got the gt 40 heads says gt right on them so wouldnt that make it a gt 40 i always thought soI found proof gt 40 so what is picture is u can see the vertical bars on engine pic on port head and it looks really good very clean well maintained

[scoootnz]

I am interested in the windscreen. I need the port side front section. I have a 96 SN do you know if the 92 windscreen will fit? Thanks in advance

[NautiqueJeff]

Where are you located? I might be interested in one of the hulls.

[Hollywood]

Jesus Christ, that is not a GT-40 ENGINE. You have a [carbureted] Pro Boss engine [that has GT-40 heads]. Post the serial number and I'll even call Correct Craft and/or PCM for you.

GT-40 engines have their own intake manifolds and fuel systems, among cosmetic difference.
http://www.skidim.com/images/1691engine.jpg.

[TRBenj]

its got the gt 40 heads says gt right on them so wouldnt that make it a gt 40 i always thought so
Nope. HW is right. While all of the HO PCM 351w's got GT40 heads (which included carb, TBI, and multiport), only the multiport EFI engines were named "GT40". The carb and TBI flavors were called "Pro Boss".

[TRBenj]

I am interested in the windscreen. I need the port side front section. I have a 96 SN do you know if the 92 windscreen will fit? Thanks in advance
It wont. Its a different windshield.

[scoootnz]

Thanks TRBenj

[skigoode]

Can you give details on trailers?

[93nautique0710]

its got the gt 40 heads says gt right on them so wouldnt that make it a gt 40 i always thought so
Nope. HW is right. While all of the HO PCM 351w's got GT40 heads (which included carb, TBI, and multiport), only the multiport EFI engines were named "GT40". The carb and TBI flavors were called "Pro Boss".so what it still has the heads thats all that matters its the same motor without the fuel injection and he said it was a pro boss gt40

[93nautique0710]

Jesus Christ, that is not a GT-40 ENGINE. You have a [carbureted] Pro Boss engine [that has GT-40 heads]. Post the serial number and I'll even call Correct Craft and/or PCM for you.

GT-40 engines have their own intake manifolds and fuel systems, among cosmetic difference.
http://www.skidim.com/images/1691engine.jpg.your a dick and souldnt use gods name in vain lol

[93nautique0710]

Jesus Christ, that is not a GT-40 ENGINE. You have a [carbureted] Pro Boss engine [that has GT-40 heads]. Post the serial number and I'll even call Correct Craft and/or PCM for you.

GT-40 engines have their own intake manifolds and fuel systems, among cosmetic difference.
http://www.skidim.com/images/1691engine.jpg.your a dick and souldnt use gods name in vain loljust kidding about that your right

[TRBenj]

its got the gt 40 heads says gt right on them so wouldnt that make it a gt 40 i always thought so
Nope. HW is right. While all of the HO PCM 351w's got GT40 heads (which included carb, TBI, and multiport), only the multiport EFI engines were named "GT40". The carb and TBI flavors were called "Pro Boss".so what it still has the heads thats all that matters its the same motor without the fuel injection and he said it was a pro boss gt40
Not to beat a dead horse, but thats still wrong. Its just a Pro Boss. When people see GT40, they automatically think multiport EFI. Yes the long blocks are the same, but many people put a lot of value in the niceties of fuel injection.

[Hollywood]

It's probably considered the next best thing (even preferred by some gearheads) to the PCM GT40 anyway, certainly nothing wrong with the engine you here for sale.

[Latonkaboarder]

Can you post a picture of the windshields? I have a buddy that has a 92 barefoot nautique that needs a new windshield.

[Pgaski]

Ok, let me clear this up. Its a Pro Boss with Carb and GT40 Heads. 285HP with a 1.23/1 Transmission 428hr.

The following are already sold:

Windshield
Both Trailers
Dash
Throttles
Pitot Pick ups
Glove box cover
Steering Helm

[Pgaski]

Engine/Transmission Sold
Boat Hulls Donated
Engine Cradles Sold
Pitot Sold
Rear View Mirror Sold
Wiring Harness Sold
Interior Carpet Trim Sold

[ABEL25]

How much would you take for both the speedos?

[Pgaski]

I have one brand new speedo left, (NIB) white face airguide. $150.00 plus shipping

[crkdskier]

Pgaski,
sent you email about the stern light
Thanks
J

[Sbman]

Is this a lid for the glove box? I have an open bow 92 ski nautique. Will it fit?