Tweet
Ok i Have an oil leak on my zr6 in my 2004 210. From the best that I can tell its comeing from the base were the oil filter goes when you dont have the relocation kit. Has anyone else had problems like this? Does the base just screw on like a filter? The hoses and crimps look clean so Im pretty sure that it is the base. Thanks
-
2010 SANTE 210
2004 SANTE 210
1986 2001
1989 2001
1992 SNOB
1987 2001 -
Oil pan
If your boat came equipped with a quick drain oil kit check the fitting for the hose on the oil pan. Happened to me and on a 196 they have to lift the engine to tighten it. I have the remote oil filter so I can't help you there.2018 200 Team H6
2009 196 Team ZR 409
2005 196 Limited ZR 375
2003 196 Limited Excalibur
1999 196 Masters Edition
1995 ProStar 190 LT1 (Bayliner)
1987 ProStar 190 -
So are you saying to change quick drain hose that you have to lift engine?Comment
-
I have an '04 SV211 with the ZR6 and the quick drain hose and I can get my hand on the fitting, so could tighten it without lifting the engine... that said, I would be doing it "blind", so I couldn't really tell if there was a leak. But I have the remote filter too, and the OP says they don't so maybe all bets are off.Originally posted by shaun313 View Post
If the issue is around the filter, maybe the seal got messed up. Have you tried just changing out the filter? And check/clean the edge where it seals? Maybe something got nicked the last time the filter was changed?Comment
Comment